Main station|Member Center|Save the desktop|Mobile browsing
Ordinary Member

Zhejiang Huanglong Lighting Technology Co

Lighting lamps and lanterns, explosion-proof electric appliances research and...

sell
  • There is no classification
contact
  • Contact:周斌
  • Phone:0577-27772517
  • Email:2850151324@qq.com
  • fax:0577-27899951
search
 
link
  • There is no link yet
home > sell > Ocean King BTC8210 explosion-proof floodlight, BTC8210
Ocean King BTC8210 explosion-proof floodlight, BTC8210
products: Views:6Ocean King BTC8210 explosion-proof floodlight, BTC8210 
brand: 浙江皇隆
price: 面议
MOQ:
Total supply:
Delivery date: Shipped within 3 days from the date of payment by the buyer
Valid until: Long-term validity
Last updated: 2016-08-05 16:15
 
Details
Ocean King
Explosion-proof floodlight,
1. Scope of application
Suitable for large-scale floodlighting in various flammable and explosive places and various indoor and outdoor operations, construction sites and large equipment. .
2. Performance characteristics
Excellent explosion-proof performance,
can work safely in flammable and explosive places.
, Use gas discharge lamps with high luminous efficiency and long life and imported high-purity mirror alumina reflectors.
, Through precise light distribution design, the lamps have high efficiency, good light projection effect and high brightness.
, through precise structural design and the latest surface treatment technology, it can prevent rain and water spray.
, the lamp shell will never corrode or rust.
, using high-strength aluminum alloy shell, with strong collision and impact resistance.
,
A variety of installation methods such as seat type, wall-mounted type, and ceiling-mounted type can be used.
3. Technical parameters
Rated voltage
Explosion-proof mark
Power factor greater than
Protection level
Anti-corrosion level
Insulation level
Advance Wire thread and cable size/,~
Overall dimensions Lamp* Ballast box*
Weight Lamp ballast box
Equipped with light source
Order number Equipped with light source rated power Average service life of luminous flux




IV. Method of use
Determine the installation location and method of lamps and ballast boxes according to the actual needs of the work site , and then prepare a three-core cable of corresponding length according to the distance from the ballast box to the power contact.
Open the end cover of the ballast box, loosen the compression nut of the cable introduction port of the ballast box, and introduce the lamp cable and power cable through the compression nut to the terminals inside the ballast box. , connect the cables according to the markings in the box, then tighten the cable compression nut and close the ballast box cover.
Connect the other end of the ballast box input cable to the power supply according to the explosion-proof requirements to illuminate.
Loosen the screw at the bottom of the lamp head holder, and you can rotate the lamp holder left and right to adjust the lighting direction. Loosen the screws on the side of the lamp holder, you can adjust the lamp head up and down to select the lighting angle, and then tighten the screws to fix it.
When replacing the light bulb, use an Allen wrench to loosen the connecting bolts between the back case and the front case, and unscrew the back case with even force. Uneven force may cause the back case to get stuck. After replacing the new bulb, pay attention to insert the rear shell into the front shell with even force and push it in slowly.
5. Precautions
,
When replacing the light bulb or wiping the glass, the power to the lamp must be cut off and the lamp must be cooled down before proceeding.
When in use,
there will be a certain temperature rise on the surface. This is a normal phenomenon and the center temperature of the transparent parts is relatively high and should not be touched.
After the lamp is cut off during use, the bulb cannot start when it is turned on immediately. This is a normal phenomenon. Wait for the bulb to cool down for ~ minutes and then start it again. Normal lighting should be avoided. Hot start should be avoided as much as possible to avoid damaging the bulb.
Warning: It is strictly prohibited to open the cover while the power is on
The power must be cut off before replacing the bulb or disassembling the lamp.
6. Quality Assurance
The company has passed the international quality system audit certification.
This product is produced in strict compliance with international quality management system standards to ensure that product quality fully meets national standards and design requirements. The product implements annual Warranty (light source is guaranteed for one year). Within one year from the date of purchase, if any failure occurs under normal use of the product, our company will be responsible for free maintenance. 【】
Ocean King
Explosion-proof floodlight,
Request for quotation
A total of0articles  Related Comments: