Ocean King anti-glare pathway lights
1. Scope of application
In order to meet the anti-glare lighting needs of railway tunnels, highway bridges, public venues and various production enterprises, the latest model developed and produced
Mirror style anti-glare street lights are widely used for flood lighting of roads and passages in tunnels, roads and bridges, large facilities, factories, stations and other places.
2. Performance characteristics
Using protective angle design and mirror coating technology to achieve anti-glare effect, which can effectively reduce irritation to the eyes of workers and construction workers. Avoid discomfort and fatigue.
It is also equipped with mirror glass, allowing customers to choose to use it in different places with high brightness requirements.
Selected gas discharge light source. High light efficiency, long life, power factor greater than light transmittance, long life of up to hours.
Special surface coating and sealing treatment ensure that the lamps will never corrode or rust in harsh environments such as humidity and high temperature.
Multiple anti-vibration structural designs and high-strength alloy shells ensure long-term safe operation in high-frequency vibrations such as roadbeds, rails, bridges and tunnels.
There are various installation methods such as seat type, ceiling type and wall-mounted type. The illumination angle can be adjusted within a wide range of up and down according to environmental needs.
3. Technical parameters
Rated voltage/
Power factor greater than
Protection level
Anti-corrosion level
Insulation level
Pitch-to-height ratio
Cable inlet thread~
Overall dimensions
Weight
Equipped with light source
Order number Equipped with light source, rated power, luminous flux, average service life
4. How to use
According to the on-site environment and lighting needs, determine the installation position and method of the lamp, then fix it and install it, press the lamp to the power supply Please prepare the corresponding length of cable according to the distance between the contacts.
Unscrew the two butterfly bolts fixing the front cover on the upper part of the lamp, open the front cover, and introduce one end of the prepared cable into the lamp cavity through the compression nut of the introduction device. According to the polarity marked on the terminal block, Connect the wiring and tighten the compression nut of the introduction device.
Close the front cover, tighten the two butterfly bolts on it, and then connect the other end of the cable to the power supply for lighting.
When multiple lamps are used in parallel, lead in the cable from another lead-in device and wire it according to the above method. When connecting a single lamp to other lamps, plug the idle lead-in device with a plug.
. Loosen the fixing screws on both sides of the bracket to adjust the lighting angle of the lamp in the upper and lower range.
. The inside of the lamp cavity is equipped with a support rod. After opening the lamp cover, it can be supported as needed.
5. How to use
When transporting, put the lamps in the provided cartons and add foam for shock absorption.
When in use, there will be a certain temperature rise on the surface of the lamp. This is a normal phenomenon and the center temperature of the transparent parts is relatively high and should not be touched.
When replacing a light bulb, try to use the same type of light bulb. If the type or power of the light bulb is changed, the supporting ballast should be replaced accordingly.
The temperature resistance of the cables introduced into the lamp cavity should not be lower than ℃ (such as silicone rubber, polytetrafluoroethylene cables, etc.).
Warning, do not install directly on combustible materials
Replace any cracked protective screen
When installing and maintaining lamps, the power must be disconnected first
The lamp must be reliable Ground.
6. Quality Assurance
The company has passed the international quality system audit and certification. This product is produced strictly in accordance with the international quality management system standards to ensure that the product quality fully meets the national standards and design requirements. The product has an annual warranty (light source Electrical appliances are guaranteed for one year). Within one year from the date of purchase, if any malfunction occurs under normal use of the product, our company will be responsible for free maintenance. 【Xiao Zhou】
Ocean King Anti-glare Path Light
Ocean King NSC9720 anti-glare pathway light—NSC9720