Ocean King High Ceiling Light
Ocean King
High Ceiling Light
1. Overview
Widely used in various large indoor stadiums, exhibition halls and factories, freight yards, warehouses, supermarkets and other places Fixed lighting used.
Ocean King High Dome Light
Ocean King
High Dome Light
2. Structural Characteristics
Use gas discharge lamps with high color rendering, high luminous efficiency and long life as the light source. And through advanced light distribution design and special processing, the luminous flux of the lamp is maximized and the light is soft and uniform
Through the careful heat dissipation structure design, the lamp and electrical appliances are integrated, with beautiful appearance and light weight
Corrosion-resistant shell material and surface coating treatment ensure that the lamp will not corrode or rust in harsh environments
Ring-type installation, safe, simple and convenient.
Ocean King High Ceiling Light
Ocean King
High Ceiling Light
3. Main technical parameters
Rated voltage/
Power factor is greater than
Protection level< br/> Anti-corrosion level
Insulation level
Pitch-to-height ratio
Wire entry thread~
Overall dimensions
Weight
Equipped with light source
Order No. Equipped with light source Rated power luminous flux Average service life
/
/
/
/
Ocean King high ceiling light
Ocean King
High ceiling light
4. How to use
According to the site environment and lighting needs, determine the appropriate installation location and then fix the lamps.
Loosen the upper and lower pairs of compression screws on the aviation plug, unscrew the compression nut, then pass the cable through the sealing plug and compression nut, and weld the three wires on the cable to the corresponding sockets of the aviation plug. pin (the ground wire is connected to position 3), and press the inserted wire through the compression screw, tighten the compression nut, then insert the aviation plug with the connected cable into the aviation socket on the upper side of the lamp, and tighten the connecting nut. Then connect the other end of the cable to the mains to achieve lighting
When replacing the bulb, loosen the buckle at the joint between the lampshade and the ballast box, and move the lampshade down as a whole (the lampshade and ballast box There are chains connecting the boxes to prevent them from falling off), unscrew the old bulb and replace it with a new one. 5. Precautions
① Non-professionals are not allowed to disassemble the lamps at will.
② When in use, there will be a certain temperature rise on the surface of the lamp, which is normal. The center temperature of the transparent parts is higher and should not be touched directly with hands.
③ When changing light bulbs, bulbs of the same type and power should be used. If the type or power of the light bulb is changed, the matching ballast should be replaced accordingly.
Warning: Do not install directly on combustible materials
.Replace any cracked protective screen
.When installing and maintaining lamps, you must first disconnect the power supply
Ocean King High Ceiling Light< br/>Ocean King
High ceiling lamp
Ocean King high ceiling lamp
Ocean King
High ceiling lamp
Ocean King high ceiling light NGC9810-Ocean King NGC9810A high ceiling light